SKU
JTD322830

322830, JET GH-1440-1 Geared Head Lathe

$11,299.00
SKU
JTD322830
The new JET GH-1440-1 and GH-1440-3 Geared Head engine lathes weigh over one ton and come equipped with precision induction hardened ground bed-ways, spindle roller bearings, and high-quality steel hardened gears in the headstock for the ultimate working durability. The enclosed gearbox design, standard coolant system, and lead screw cover provide a smooth and quiet operation while maintaining peak performance. The GH-1440-1 and GH-1440-3 also includes a patented electronic chuck key docking station that prevents startup without the chuck key when safely docked.

322830, JET GH-1440-1 Geared Head Lathe

The new JET GH-1440-1 and GH-1440-3 Geared Head engine lathes weigh over one ton and come equipped with precision induction hardened ground bed-ways, spindle roller bearings, and high-quality steel hardened gears in the headstock for the ultimate working durability. The enclosed gearbox design, standard coolant system, and lead screw cover provide a smooth and quiet operation while maintaining peak performance. The GH-1440-1 and GH-1440-3 also includes a patented electronic chuck key docking station that prevents startup without the chuck key when safely docked


Features:

  • V-way bed design is induction hardened and ground
  • Splined, not keyed, shafts are utilized
  • D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
  • Independent leadscrew and feed rod
  • Adjustable gibs are incorporated in the carriage and slideways
  • Safety on/off switch
  • Emergency Stop within easy reach of the Operator
  • Electronic Chuck Key Docking Station
  • Chuck Guard
  • Foot Brake
  • Gearbox provides larger threading and feed capabilities with no gear changes
  • Spindle actuation control is apron mounted
  • Gap bed section provided for larger diameter work
  • Inch-metric dials are standard
  • Compound and cross slide have backlash elimination
  • Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
  • Front removable chip tray
  • Spindle jog button for easy gear engagement and spindle inching
  • Coolant system
  • Full length splash guard
  • STANDARD ACCESSORIES
  • 6" 3-Jaw Chuck
  • 8" 4-Jaw Chuck
  • 12" Face Plate
  • Steady & Follow Rest
  • Metric Change Gears
  • Lead Screw Cover
  • LED Work Lamp
  • Micro Carriage Stop
  • Chuck Guard


Specifications:

  • Swing Over Bed (In.) 14
  • Swing Over Cross Slide (In.) 8-1/5
  • Swing Through Gap (In.) 20
  • Length of Gap (In.) 9-3/8
  • Distance Between Centers (In.) 40
  • Spindle Bore (In.) 1-1/2
  • Spindle Mount D1-4
  • Spindle Taper with Sleeve MT-5
  • Number of Spindle Speeds 12
  • Range of Spindle Speeds (RPM) 40-1800
  • Number of Longitudinal and Cross Feed Rates 40
  • Range of Longitudinal Feeds (IPR) 0.0012 - 0.0294
  • Range of Cross Feeds (IPR) 0.0004 - 0.0103
  • Number of Inch Threads 40
  • Range of Inch Threads (TPI) 4-112
  • Number of Metric Threads 23
  • Range of Metric Threads 0.45-7.5
  • Max Tool Size (In.) 5/8 x 5/8
  • Compound Slide Travel (In.) 3-1/2
  • Cross Slide Travel (In.) 6-3/8
  • Carriage Travel (In.) 37-1/2
  • Tailstock Spindle Travel (In.) 4-3/4
  • Taper in Tailstock Spindle MT-3
  • Follow Rest Capacity (In.) 2-5/8
  • Steady Rest Capacity (In.) 3-1/2
  • Width of Bed (In.) 10-1/5
  • Motor (HP) 3HP, 230V, 1PH
  • Prewired (V.) 230V
  • Weight (Lbs.) 2336
  • Overall Dimensions (L x W x H) (In.) 74-4/5 x 28 x 46


Red Assurance 2-year Warranty:

JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account