505122, JET JAT-122, 1/2" Impact Wrench, 2" Extension (750 ft-lbs), R12 Series
Product Description
505122, JET JAT-122, 1/2" Impact Wrench, 2" Extension (750 ft-lbs), R12 Series
JET® Impact Wrenches are available in lightweight carbon composite housings or impact-resistant aluminum housings. JET square drive impacts range from the 3/8 inch to the industrial 1-1/2 inches. Check out our full line of impact wrenches. With torque power up to 2,000 ft-lbs, JET ensures there is an impact wrench to fill your needs. Composite housing improves balance and reduces weight
Features:
- Patented Twin Hammer impact mechanism improves durability while delivering balanced power
- Patented, one-hand forward/reverse switch design
- Four position speed selection and full reverse power
Specifications:
- Square Drive (In.) 1/2
- Working Torque (Ft.) (Lbs.) 50-550
- Max Torque (Ft.- Lbs.) 750
- Free Speed (RPM) 8,500
- Bolt Capacity (In.) 3/4
- Anvil Retainer Type Ring
- Overall Length (In.) 8.8
- Air Consumption (CFM) 6.7
- Vibration Value (M/S2) 9.43
- Noise Level (DB) 108
- Air Inlet (NPT/In.) 1/4
- Air Hose (ID/In.) 3/8
- Air Pressure (PSI) 90
Limited Lifetime Warranty:
JET Tools warrants every product it sells. If one of Jet tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these Walter Meier Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools.
